Working with the Command Line
The current version of the License Manager allows you to activate licenses from the command line. The following command line parameters are supported:
Parameter | Action |
---|---|
/SilentActivation | Use this parameter to activate the license that corresponds to the serial number specified after /SN. |
/SN:<serial number> | Use this parameter to specify the serial number of the license to be activated. Specify the serial number in one of the following formats: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX or XXXXXXXXXXXXXXXXXXXXXXXX. |
/SaveActivationEMailToFile:<file name> | Use this parameter to save to file the text of the message generated by the program and containing the information required for activation of the number specified in the /SN= parameter. |
/LoadActivationFile:<file name> | Loads the ABBYY License File and activates the serial number corresponding to this file. |
When launched from the command line, the License Manager may return the following return codes:
Return code | Description |
---|---|
-1 | No command line parameters were specified. |
0 | No errors. |
1 | Invalid serial number. |
2 | The serial number has been already activated. |
3 | Unable to activate the serial number via the Internet. Try to activate it by e-mail. |
4 | The license with hardware protection cannot be activated by e-mail. |
5 | The specified file has not been found or is unavailable. |
6 | Incorrect license file. |
7 | Unable to load the application. |
8 | Unable to save to file the text of the activation request. |
9 | Unknown command line parameter. |
11 | Unable to find the USB key to activate the license with hardware protection. |
12 | Several USB keys have been found. Please, leave only one USB key plugged to the computer. |
13 | Unable to connect to Licensing Service. |
See also
8/15/2023 1:19:30 PM