Running the program
- in Administrator mode: go to Start → All Programs → ABBYY FlexiCapture 12 and select ABBYY FlexiCapture Administrator Station.
- in Operator mode: go to Start → All Programs → ABBYY FlexiCapture 12 and select ABBYY FlexiCapture Operator Station.
Important! Before running the program, ensure that:
- The scanner is connected to the PC and powered on. If your scanner has not been connected, refer to the scanner user guide. For the scanner to operate correctly, you must power on the scanner before you power on the PC.
- A protection key has been installed on your PC. You cannot run the program without it.
Registry keys that control the launching of the application
You can use the following registry keys (in Shell\StartUp) to control how the application is launched:
- AdminMode - defines whether the application runs in Operator or Administrator mode;
- Project - sets the project that is opened automatically when the application is launched;
- Batch - sets the batch that is opened automatically when the application is launched (the batch must be specified);
- ProhibitChangePath - prohibits changing the batch and project that open automatically in Operator mode (set the key value to True).
These keys are not created in the registry by default. If required, the Administrator may add these keys into the registry of the user's operating system.
The registry keys can be overridden by the corresponding command line launch parameters.
Command line launch parameters
The following parameters can be used to launch the application via the command line:
FlexiCapture.exe [/Station:(Admin,Operator)] [/Project:"path to project"] [/Batch:"batch name"] [/ProhibitChangePath]
- [/Station:(Admin,Operator)] - defines whether the application runs in Operator or Administrator mode. If no mode is specified, a dialog box is displayed upon application launch which prompts the user to select the desired mode;
- [/Project:"path to project"] - sets the project that is opened automatically when the application is launched;
- [/Batch:"batch name"] - sets the batch that is opened automatically when the application is launched;
- [/ProhibitChangePath] - prohibits changing the batch and project that open automatically in Operator mode.
12.04.2024 18:16:02