Running the program

To launch ABBYY FlexiCapture

  • in Administrator mode: go to Start → All Programs → ABBYY FlexiCapture 12 and select ABBYY FlexiCapture Administrator Station.
  • in Operator mode: go to Start → All Programs → ABBYY FlexiCapture 12 and select ABBYY FlexiCapture Operator Station.

Important! Before running the program, ensure that:

  • The scanner is connected to the PC and powered on. If your scanner has not been connected, refer to the scanner user guide. For the scanner to operate correctly, you must power on the scanner before you power on the PC.
  • A protection key has been installed on your PC. You cannot run the program without it.

The following parameters can be used to launch the application via the command line:

FlexiCapture.exe [/Station:(Admin,Operator)] [/Project:"path to project"] [/Batch:"batch name"] [/ProhibitChangePath]

  • [/Station:(Admin,Operator)] - defines whether the application runs in Operator or Administrator mode. If no mode is specified, a dialog box is displayed upon application launch which prompts the user to select the desired mode;
  • [/Project:"path to project"] - sets the project that is opened automatically when the application is launched;
  • [/Batch:"batch name"] - sets the batch that is opened automatically when the application is launched;
  • [/ProhibitChangePath] - prohibits changing the batch and project that open automatically in Operator mode.

25.05.2023 7:55:03

Please leave your feedback about this article

Usage of Cookies. In order to optimize the website functionality and improve your online experience ABBYY uses cookies. You agree to the usage of cookies when you continue using this site. Further details can be found in our Privacy Notice.