Scanning Images
The application may acquire images either directly from a scanner or load them from a folder by means of a virtual scanner. To acquire images, you must select a scanner source and start the scanning process. During scanning, you can monitor the quality of the images and interrupt scanning or rescan defective images if necessary.
Scanner source
Initiating the scanning process
Stopping the scanning process
Inserting scanned pages into a batch
Rescanning pages
Scanning Tips
You can set the scanning options in the built-in scanning dialog box or in the scanner driver dialog box. For more information about the dialog box, see Selecting the Scanning Interface.
Place your documents face down on the scanner, making sure they are properly adjusted. Skewed images may be converted incorrectly.
Conversion quality depends on the quality of the original document and scanning parameters. Poor image quality may have an adverse effect on the quality of conversion. Be sure to select the scanning parameters appropriate for your document.
More information about some of the scanning options is available in these sections
Tuning Brightness
Selecting the optimal resolution
26.03.2024 13:49:49
Important! The scanner must be connected to your computer. Please refer to the scanner's documentation for directions on connecting the scanner. If no scanner is connected, you can only use a virtual scanner to import images from a folder.
Note. If you are scanning a batch of a certain type, all the scanning settings, including the scanner source, are made in the properties of the batch type when creating it with the
in the image window.
in the image window.