PrepareImageMode Object (IPrepareImageMode Interface)
This object contains different attributes specifying how an image will be prepared during conversion to the internal format. All properties of a newly created object of this type are set to reasonable defaults. To know about the default value of this or that property, see its description. The sequence of the transformations upon the prepared image is the following: first the rotation is performed, and then the image is mirrored.
The PrepareImageMode object is a persistent object. This means that the object's current state can be written to persistent storage on disk. Later, the object can be re-created by reading the object's state from persistent storage. The following methods provide persistence of the object: SaveToFile, and LoadFromFile.
Properties
| Name | Type | Description |
|---|---|---|
| Application | Engine, read-only | Returns the Engine object. |
| Main settings | ||
| BackgroundFillingColor | int |
Specifies the color used for filling the areas which are added to the image after skew correction. The default value of this property is -1, which means that the color is determined by ABBYY FineReader Engine automatically.
|
| BinarizationThreshold | int |
This property is used for fine-tuning of the brightness threshold during image preprocessing: the pixels with brightness higher than the threshold will be replaced with white pixels, the rest with black. The value of this property may be in the range from 0 to 255. The default value of this property is -1, which means that the binarization threshold is determined by ABBYY FineReader Engine automatically.
|
| CorrectSkew | VARIANT_BOOL |
This property set to TRUE tells ABBYY FineReader Engine to correct skew during image preparation. The type of skew correction is defined by the CorrectSkewMode property. If this property is set to FALSE, the value of the CorrectSkewMode property is ignored. By default, this property is set to TRUE. |
| CorrectSkewMode | int |
Specifies the mode of skew correction. The value of this property is an OR superposition of the CorrectSkewModeEnum enumeration constants which denote the types of skew correction. 0 means do not correct skew. The value of this property is ignored, if the CorrectSkew property is set to FALSE. By default, this property is set to CSM_CorrectSkewByHorizontalText | CSM_CorrectSkewByVerticalText. |
| EnhanceLocalContrast | VARIANT_BOOL |
Specifies whether the local contrast of the image should be increased. Such preprocessing may increase the quality of recognition.
By default, this property is set to FALSE. |
| InvertImage | VARIANT_BOOL |
This property set to TRUE tells ABBYY FineReader Engine to invert colors of the prepared image. By default, this property is set to FALSE. |
| KeepOriginalCoordinatesInfo | VARIANT_BOOL | This property is deprecated and will be deleted in future versions. |
| MirrorImage | VARIANT_BOOL |
This property set to TRUE tells ABBYY FineReader Engine to mirror the prepared image around its vertical axis. By default, this property is set to FALSE. |
| OfficeConversionSettings | OfficeConversionSettings, read-only | Provides access to the settings for importing digital documents using the same methods that open the images. |
| PhotoProcessingMode | PhotoProcessingModeEnum |
Specifies whether the processing image should be treated as a photo. If a photo is processed, FineReader Engine uses special algorithms for such image on different stages of image processing. By default, this property is PPM_Auto, which means that FineReader Engine should define automatically whether the image is a photo. |
| RasterizeFreeText | VARIANT_BOOL |
Specifies whether Free Text annotations from the input PDF document should be retained. By default, this property is set to FALSE.
|
| Rotation | RotationTypeEnum |
This property specifies the rotation angle to apply to the image during preparation. It specifies no rotation by default. |
| Resolution overwriting | ||
| AutoOverwriteResolution | VARIANT_BOOL |
Specifies whether resolution of the prepared image should be automatically overwritten. The property is only available if the value of the OverwriteResolution property is FALSE. If this property is set to TRUE, ABBYY FineReader Engine will automatically detect and overwrite image resolution. The new resolution will be applied before all other stages of image preparation (such as binarization, skew correction, etc.).
By default, the value of the property is TRUE. |
| OverwriteResolution | VARIANT_BOOL |
Allows you to overwrite resolution of the prepared image. The resolution is overwritten depending on the values of the XResolutionToOverwrite and YResolutionToOverwrite properties. In this case, the new resolution will be applied before other stages of image preparation (i.e., binarization, deskewing, etc.). Image resolution can be overwritten automatically (see the description of the AutoOverwriteResolution property). See also IImageDocument::ChangeResolution, which allows you to correct image resolution after it was converted to internal format.
By default, this property is set to FALSE. |
| XResolutionToOverwrite | int |
Specifies the horizontal resolution of the original image in dpi. This value is used to overwrite resolution of the prepared image when resolution of the original image is not defined or incorrect and only if the OverwriteResolution property is TRUE. ABBYY FineReader Engine works only with the images for which horizontal and vertical resolutions are the same, therefore the program stretches the image so that the horizontal and vertical resolutions of the prepared image are identical and equal to the maximum of XResolutionToOverwrite and YResolutionToOverwrite. By default, this property is set to 300. |
| YResolutionToOverwrite | int |
Specifies the vertical resolution of the original image in dpi. This value is used to overwrite resolution of the prepared image when resolution of the original image is not defined or incorrect and only if the OverwriteResolution property is TRUE. ABBYY FineReader Engine works only with the images for which horizontal and vertical resolutions are the same, therefore the program stretches the image so that the horizontal and vertical resolutions of the prepared image are identical and equal to the maximum of XResolutionToOverwrite and YResolutionToOverwrite. By default, this property is set to 300. |
| Creating image planes | ||
| CompressImage | ThreeStatePropertyValueEnum |
Specifies if the image should be compressed during conversion to the internal format. Only color and gray images may be compressed. ZIP compression is used. By default, this property is set to TSPV_Auto, which currently means that only the gray or color images obtained from PDF files with text layer will be compressed. |
| CreatePreview | VARIANT_BOOL |
This property set to TRUE tells ABBYY FineReader Engine to create preview page for the prepared image. By default, this property is set to FALSE. |
| DiscardColorImage | VARIANT_BOOL |
This property set to TRUE tells ABBYY FineReader Engine to leave only black-and-white plane in the prepared image. In this case, image binarization is performed during image preparation. By default, this property is set to FALSE. |
| PreviewHeight | int |
Specifies the height in pixels of the preview page. This property is valid only if the CreatePreview property is TRUE; otherwise, it is ignored. By default, this property is set to 90. |
| PreviewWidth | int |
Specifies the width in pixels of the preview page. This property is valid only if the CreatePreview property is TRUE; otherwise, it is ignored. By default, this property is set 64. |
| UseFastBinarization | VARIANT_BOOL |
If this property is TRUE, ABBYY FineReader Engine will use algorithms for fast image binarization. Binarization is performed either when the image is loaded (if the DiscardColorImage is TRUE during preparation), or later when a black-and-white image is necessary (e.g., when you call the IImageDocument::BlackWhiteImage property for an open image document for the first time). This property set to TRUE will speed up binarization; however, its quality may deteriorate. By default, the value of this property is FALSE. |
Methods
| Name | Description |
|---|---|
| CopyFrom | Initializes properties of the current object with values of similar properties of another object. |
| LoadFromFile | Restores the object contents from a file on disk. |
| SaveToFile | Saves the object contents into a file on disk. |
Related objects
Output parameter
This object is the output parameter of the CreatePrepareImageMode method of the Engine object.
Input parameter
This object is passed as an input parameter to the following methods:
- AddImageFile, AddImageFileFromAttachment, AddImageFileWithPassword, AddImageFileWithPasswordCallback, AddImageFileFromMemory methods of the FRDocument object
- Start method of the BatchProcessor object
- CreateFRDocumentFromImage, PrepareBitmapBits, OpenImageFileFromMemory, OpenBitmapBits, OpenBitmap, OpenDib, PrepareBitmap, PrepareDib, InjectTextLayer methods of the Engine object
- SaveImageRegionTo method of the ImageDocument object
Samples
The object is used in the following code samples: CommandLineInterface.
See also
03.07.2024 8:50:25